网站模板—机械设备

搜索

Adsorption type dryer

产品详情

产品参数

No Heat Regeneration Adsorption Compressed Air Dryer ProductFeatures

Stable and consistent outlet pressure dew point

·Reasonable simplified design ensures that the compressed air and desiccant contact time is 4.8 seconds to meet the dew point requirements of finished gas；
·30% of the remaining amount of desiccant, desiccant and compensation with the natural aging, to ensure that the drying effect；
·Large diffuser to ensure uniform air flow through the desiccant layer, eliminating channeling phenomenon.

Regeneration loss less than 12%

·Excellent barrel design, saving 95% of the heat absorbed, the stored heat is used to increase regeneration regeneration temperature of regeneration stage, improve the desorption capacity of the equipment, making the regeneration completely；
·Drying and regeneration using reverse convection, wet air flow through the best effect when the adsorbent；
·The amount of regeneration gas can be adjusted according to the operating load demand of the dryer.

Dryer long service life

·Appropriate barrel size, the gas flow through the desiccant layer flow rate and time to maintain the best state, give full play to the performance of desiccant；
·Reasonable system configuration, the gas into the barrel before the business of oil removal even if the air flow contained in the oil and heavy pollutants, to avoid contamination of the desiccant layer；

working principle

·No heat regeneration adsorption compressed air dryer is the use of desiccant material itself unique micropores, according to capillary adsorption of water molecules in the air, while the pressure relief desorption heat removal to remove the adsorption of moisture. Equipment is generally made in the form of dual-barrel, two tubes under the control of the program controller to work alternately, a tube to absorb moisture, the other cylinder desorption regeneration, continuous work cycle.